Back to Course

Scantling with ISO 12215

0% Complete
0/0 Steps
  1. Introduction
    Meet the instructors
  2. Introduction to the course
  3. What is scantling?
    What should we understand by scantling?
    1 Quiz
  4. Loads on a boat
    Loads on a boat
    1 Quiz
  5. Types of structures
    Types of structures and structural elements
    1 Quiz
  6. Situation of structural elements
    Moulded lines
    1 Quiz
  7. How to measure panels and stiffeners
    1 Quiz
  8. Union and connection elements
    Union and connection elements
    1 Quiz
  9. Calculation of resistant elements
    Information required for the scantling process
    1 Quiz
  10. Hull zones for scantling
    1 Quiz
  11. General procedure to follow in the calculations
    1 Quiz
  12. Procedure for non-homogeneous materials
    1 Quiz
  13. Procedure for homogeneous materials
    1 Quiz
  14. Analysis of the results (general)
    1 Quiz
  15. Explanations and notes to ISO 12215-5
    Diving into the ISO 12215
    1 Quiz
  16. Definition of plates and profiles
    1 Quiz
  17. Composition, properties and position
    1 Quiz
  18. Design pressures
    1 Quiz
  19. Deduction of solicitations
    1 Quiz
  20. Mechanical properties of structural elements
    1 Quiz
  21. Design stresses
    1 Quiz
  22. Analysis of the results
    Analysis of the results
    1 Quiz
  23. Example 1: mechanical properties of a composite
    Example: computing the mechanical properties of a composite (by hand)
    1 Quiz
  24. Example 2: detailed calculation, step by step, of a bottom panel, according to ISO 12215-5
    Detailed calculation of a bottom panel - Part 1
  25. Detailed calculation of a bottom panel - Part 2
  26. Detailed calculation of a bottom panel - Part 3
  27. Scantling software
    Download the course software
  28. Software installation
  29. How to install Windows in Linux
  30. Software overview
  31. Example 3: Detailed calculation of a GRP monohull sailboat 17 m in length with a scantling software
    Introduction to the example
    1 Quiz
  32. Creating a new project
    1 Quiz
  33. Study of the structure: side area
  34. Study of the structure: bottom area
  35. Study of hull stiffeners
  36. Deck
  37. Cockpit
  38. Superstructure
  39. Transom
  40. Collision bulkhead
  41. Rigging
  42. Rudder
  43. Engine bench
  44. Example of use of the ISO 12215-10
  45. Keel
  46. Appendix
    Brief reminder of elasticity and strength of materials
    1 Quiz
  47. Stress-strain curve
    1 Quiz
  48. Axial loads
    1 Quiz
  49. Bending loads
    1 Quiz
  50. Fibers and resins
    1 Quiz
  51. Final assignment
    Final assignment
  52. Course materials
    Course materials
  53. Course Survey
    Course evaluation survey
    1 Quiz
  54. Summary
    Wrap-up

Materials used in this section (pdf files):